The primary reason for leaking fuel lines in metal is corrosion, necessitating replacement over time. If you are searching for an e85 fuel line on the market, you have come to the right place. We are here to save you time and stress from reading endless reviews.

This fuel line features a 4mm wall thickness, allowing for easy bending with your hand. The large diameter helps prevent fuel starvation, enabling greater fuel flow. It is compatible with vehicles requiring large tube diameters.

The fuel line's specifications are as follows: ID: 5/8 inch (16mm), OD: 0.9 inch (23mm), and Length: 3 Meter / 10 ft. The inner hose is made of NBR rubber, the middle layer is Polyester, and the outer layer is NBR. It has a Maximum Working Pressure of 10kg/1Mpa and a Bursting Pressure of 25kg/2.5Mpa. The Operating temperature range is -68°F to +212°F/-40°C to 100°C.

The best part is that this fuel line provides clean bends without kinking. It is made of nitrile butadiene rubber, making it ideal for transferring petroleum products in small engines. To ensure successful installation, make sure to use the right clamps and hose barbs.

This NBR and Polyester braided fuel line supports a burst pressure of 2.5 Mpa and a working pressure of 1 Mpa. It may be a bit stiff for some, but it is easy to work with when using the appropriate mechanical tools.

The NBR hose can withstand temperatures ranging from -68°F to +212°F/-40°C to 100°C. It has excellent resistance to heat, pressure, and bending, and is resilient in folding and compressing.

This NBR fuel line is designed for conveying bio-diesel, E-85, E-10, gasoline, and diesel fuels for buses, trucks, and cars, among others. It is ethanol tolerant, cold-resistant, and oil resistant.

The 10an hose is made with high-quality Nylon, preventing rusting and corrosion. The 5/8 fuel hose also has a 4mm wall thickness.

The 5/8 inch diameter helps in better fuel flow and intake, ensuring the car engine can process the fuel in the best possible state. The 10an push lock hose comes as a roll of 10 feet, suitable for a wide range of applications.

The 16mm fuel line is double annealed, making it easy for bending and flaring. You can cut the 5/8 oil hose according to your needs. The 5/8 high-pressure fuel line can withstand temperatures from -68°F to +212°F, making it stronger against heat and extreme conditions.

The 10an fuel hose enables sharp bends without kinking, with a minimum bend radius up to 4.7 inches (120mm). The 5/8 transmission hose is easy to work with and can even be bent by hand, though it is recommended to bend it slowly and back and forth for perfect curves.

The 10an fuel line is specially designed to meet the SAE 30R9 standard and can be compatible with any fuel (including methanol and nitromethane), oil, E85, E10, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide.

product information: